Our company products are various and can be classified into two main parts:

A- Conventional Products
Ordinary Portland Cement It is produced according to the Iraqi specifications no 5/1984.
Sulphate Resisting Portland Cement It is produced according to the Iraqi specifications no 5/1984.
Quick and Hydrated Lime Its produced according to (I.O.S) No 807/1988.
Filler (CaCo3) It is produced by grinding Calisium Carbonate an a Fineness of 85% and passes through a seive of 75 micro.

Oil Well Cement
It is produced according to (API) No (10) 1984 type G. It suites unnatural circumstances such as pressure and heat. It contains a high ratio of C3S not less than 50% it contains a low ratio of free lime not more than 1% it has high and moderate sulphate resistant. It is used in cementing oil wells from land surface down to depth of 2440 meters.

Mixtures of Cement and Lime Agent
1: 1: 6 (Cement/ Lime Agent/ Sand)
1: 2: 9 (Cement/ Lime Agent/ Sand)
It is distinguished with medium strength and high plasticity. It is used as atight of water on the ceiling joints and as a basic or outer coat in covering surfaces instead of gypsum.
1: 0.5: 4.5 (Cement/ Lime Agent/ Sand)
It is used in cold weather which requires quick development of compressive strength.
1: 3: 12 (Cement/ Lime Agent/ Sand)
It is used in hot weather in which the speed of hardening is very high and to decrease rate of evaporation of water.
A- Non Conventional Products

Rapid Hardening Portland Cement
This type of cement is produced according to the Iraqi specefication no 5/ 1984 in a high fineness. The specific is not less than 4000 cm2/gm. To increase the rate of the reaction with added water and the development of the compressive strength earlier.

Low Alkalis Cement
It is produced according to (ASTM) 150/1984 contains a low ratio of alkalies to increase the resistance against active silica in the preparing concrete Mix.

Low Heat of Hydration
It is produced according to the British specification (BS 1370/1979) It contains a Low ratio of C3S and C3A and A relatively high ration of C2S.

High Alumina Cement
It is produced according to (BS) No 915/1972, it is produced by burning pure Calisium Carbonate and Boxite, it is used in steel kilns, boilers and cement kilns.

Hydrolic Lime
This type of lime has hydrolic characteristics (i.e. ability of Hardening under water). It resist the chemical influence of salty water.